China supplier Drive Stainless Steel Engineering Plastic Combination Chain

Product Description

Drive Stainless Steel Engineering Plastic Combination Chain

Combined stainless steel engineering plastic chain
Engineering plastic composite chain (PC) uses stainless steel outer chain plate and pin to improve strength. It also uses elastic engineering plastic inner chains to reduce weight and improve wear life without lubrication.
HZPT is the CHINAMFG of chain specification. It launched the ANSI series for the first time more than 10 years ago. Many satisfied customers usually call it the Poly Steel chain.
The product is flexible to outdoor conditions, detergents, and steam, as well as food ingredients (such as oil and lactic acid), and can provide ideal anti-corrosion solutions in various mechanical applications.

Advantages of engineering plastic composite chain
Improved performance
Engineering plastic composite chain provides a cleaner and more durable substitute for stainless steel chain for applications with corrosion and insufficient lubrication. It is much lighter than the stainless steel chain, and another advantage is that the noise is lower.
Reduce maintenance costs
The engineering plastic composite chain can be interchanged with BS and ANSI chains to reduce chain wear, which is good news for customers - reduce maintenance.
Wide application
It can provide multiple configurations and complete accessories (a-1, K-1, SA-1, SK-1, D-1, and D-3). Almost any application can use a PC chain.
Industrial application of engineering plastic composite chain
• Food processing
• Packaging
• Pharmaceutical
• Healthcare
• Lighting electronics
• Small conveyors
• ... There are more
We are committed to relying on our scientific and process management, as well as continuous innovation and improvement, to provide reliable and easy-to-use special agricultural chains, flat-top transport chains, and double-plus chains. We absorb new ideas, have strict quality control, all-around service tracking, and insist on making high-quality products. From a practical point of view, paying attention to the user experience is the basic requirement of our research and development.
The double-pitch chain with an extension pin is a deformed product of a standard roller chain. Its structure
The characteristics are the same as the standard roller chain, except that the pin shaft is lengthened according to special requirements
Requirements for raw materials or semi-finished products used in fixed production. This chain is mainly used in assembly lines, such as rubber glove production lines. The company can select different materials according to customer requirements, such as carbon steel, stainless steel, etc. The pin shaft can be customized with different diameters and lengths according to customer requirements.
1).  Quality standard: ISO9001 certification
2).  Material: alloy steel, carbon steel, or stainless steel
3).  Long service life
4).  Standard pitch
5).  Excellent quality control and advanced production equipment.
We are chain manufacturers. For extended pin space, it can be made according to customer requirements.

We specialize in the production of agricultural roller chains, flat-top chains, chains, hollow pin chains, beer filling and packaging line conveyor chains, paver chains, auxiliary sidebar lifting chains, bucket lifting chains (cement mill chains), forged scraper chains, automobile industry loading chains, metallurgical industry loading chains, mining machinery transport chains, trencher chains, sugar factory chains, double flexible chains, etc. Welcome to call and email for a consultation!

Related Products

We also supply sprockets to match your chains.

Contact us: We care about our valued buyers; if you have any questions, our Customer Service staff will gladly help you. We try our best to reply to your emails as soon as possible; however, due to the high volume of daily incoming emails and the time zone difference, we may not be able to reply immediately. Please allow 24 business hours for us to respond.
We are specialized in producing Agricultural Roller Chain, Flat Top Chain, Track Chain, Hollow Pin Chain, Conveyor Chain for Beer Filling and Packing Line, Paver Chain, Attachment Sidebar Elevator Chain, Bucket Elevator Chain (Cement Mill Chain), Forging Scraper Chains, Loading Chain for Automobile Industry, Loading Chain for Metallurgical Industry, Conveyor Chain for Mine Machinery, Trencher Chain, Sugar Mill Chain, Double Flex Chain, etc. Welcome calls and emails to inquiries!

Related Products

 

 

 

 

Company

 

 

 

 

Usage: Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain
Material: Iron
Surface Treatment: Oil Blooming
Feature: Oil Resistant
Chain Size: 1/2"*3/32"
Structure: Plastic Combination Chain
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

drive chain

How does the material hardness of a drive chain affect its durability?

The material hardness of a drive chain plays a significant role in determining its durability and resistance to wear. Here is a detailed explanation:

Material hardness refers to the ability of a material to resist indentation, abrasion, and penetration by external forces. In the context of drive chains, the hardness of the chain's components, such as pins, bushings, and rollers, directly affects the chain's durability and lifespan.

When it comes to drive chain durability, the following factors come into play:

  • Resistance to Wear: A higher material hardness typically results in better resistance to wear. Drive chains with harder materials can withstand the friction and contact forces encountered during operation, minimizing the wear on critical components. This translates to extended chain life and reduced maintenance requirements.
  • Impact Resistance: The material hardness of a drive chain also affects its ability to resist impact forces. Chains operating in environments with frequent impacts or shock loads, such as in mining or heavy-duty applications, require high hardness materials to withstand the sudden stresses without deformation or failure.
  • Resistance to Deformation: Harder materials exhibit greater resistance to deformation under load. This is particularly important in drive chains where precise interlocking of chain components is necessary for efficient power transmission. Chains with higher material hardness maintain their shape and dimensional integrity, ensuring consistent performance and minimizing the risk of chain elongation or misalignment.
  • Corrosion Resistance: While material hardness primarily affects wear resistance, it can indirectly impact the chain's resistance to corrosion. Certain high-hardness materials, such as stainless steel or specific alloys, offer improved corrosion resistance compared to softer materials. This is especially relevant in applications where the chain is exposed to corrosive environments, such as marine or chemical industries.

It is important to note that while higher hardness generally leads to improved durability, excessive hardness can also result in brittleness and reduced impact resistance. Therefore, a balance must be struck between hardness and other mechanical properties to ensure optimal performance and durability of the drive chain.

Manufacturers typically specify the appropriate hardness level for drive chain components based on the specific application requirements. These specifications take into account factors such as load capacity, operating conditions, anticipated wear rates, and desired service life.

Regular maintenance practices, such as proper lubrication, periodic inspection, and tension adjustment, are essential for maximizing the durability and performance of the drive chain, regardless of its material hardness.

By selecting a drive chain with the appropriate material hardness and implementing proper maintenance practices, operators can ensure optimal durability, extended chain life, and reliable power transmission in various industrial applications.

drive chain

Can a drive chain be used in a woodworking or sawmill application?

Yes, a drive chain can be used in woodworking and sawmill applications, where reliable power transmission and durability are essential. Here is a detailed explanation:

In woodworking and sawmill operations, machinery and equipment such as saws, planers, jointers, and conveyors are commonly used. Drive chains offer several advantages in these applications:

  • High Load Capacity: Drive chains are known for their high load-carrying capacity, making them suitable for heavy-duty applications commonly found in woodworking and sawmill operations. They can handle the significant forces and loads associated with cutting, shaping, and moving timber and lumber.
  • Durability and Reliability: Woodworking and sawmill environments can be demanding, with conditions such as sawdust, vibrations, impacts, and variable operating temperatures. Drive chains are designed to withstand these harsh conditions and provide reliable and durable power transmission even in rugged and demanding operating environments.
  • Precise Power Transmission: Drive chains offer precise power transmission, ensuring accurate and synchronized movement of the machinery components involved in woodworking and sawmill operations. This allows for consistent and reliable cutting, shaping, and material handling processes.
  • Customization Options: Drive chains can be customized to suit specific woodworking and sawmill applications. They are available in various sizes, pitches, and materials to accommodate different loads, speeds, and environmental conditions.
  • Compatibility with Auxiliary Components: Drive chains can be easily integrated with auxiliary components commonly used in woodworking and sawmill machinery, such as tensioners, guides, sprockets, and bearings. This allows for efficient and reliable power transmission throughout the entire system.
  • Cost-Effectiveness: Drive chains offer a cost-effective solution for power transmission in woodworking and sawmill operations. They have a long service life, reduced maintenance requirements, and lower replacement costs compared to some alternative power transmission systems.

It is important to consider the specific requirements of the woodworking or sawmill application when selecting a drive chain. Factors such as load capacity, speed, environmental conditions, and maintenance considerations should be taken into account.

Regular maintenance, including inspection, lubrication, and tension adjustment, is crucial to ensure optimal performance and longevity of the drive chain in woodworking and sawmill applications.

By utilizing drive chains in woodworking and sawmill operations, operators can benefit from reliable power transmission, durability, and the ability to withstand the challenging conditions encountered in these industries, ultimately contributing to efficient and precise woodworking and lumber processing.

China supplier Drive Stainless Steel Engineering Plastic Combination Chain  China supplier Drive Stainless Steel Engineering Plastic Combination Chain
editor by CX 2023-10-11